Series 10V: Variable Speed Hydropneumatic Booster Control Panel

Request Quote Request Quote

Immediate shipping on selected models, 4 to 7 days for the rest of the models.

Features

Energy savings of up to 50%.
LCD screen indicating pressure, water level in the cistern, pump speed, faults, and allowing easy programming of settings. Only 7 parameters need adjustment, making it very simple to start or modify the system calibration.
Includes everything needed to operate: cabinet, variable speed drives, protections, selectors, indicators, remote fault alarm contact, forced ventilation, pressure sensor, etc.
Robust, high-tech design with the best quality.
Modbus Communication via Ethernet or RS-485 (Optional).

Description

The variable speed hydro-pneumatic panels SERIES 10-V control the automatic operation of 1 to 4 pumps, alternating and running them simultaneously to maintain constant pressure within the adjusted range of up to 200 PSI using a variable speed drive for each pump.

The panel provides protection against the following faults: short circuit, low water level in the cistern, overload, high/low voltage, and phase failure. Adjusting its controls is very easy, requiring configuration of start pressure, stop pressure, minimum speed, low-pressure alarm, proportional gain, acceleration control, integral control, and stop delay.

The SERIES 10-V panels use one variable speed drive per pump and have many advantages over panels that use only one variable speed drive per board. These include greater energy savings, better control over pressure, and the elimination of water hammer.

This panel can be ordered with network connection for monitoring with Modbus RTU via RS-485 or Modbus TCP-IP via Ethernet. The panels feature an NEMA 4(IP66) dust and water-resistant cabinet with corrosion-resistant paint. It includes everything needed to operate: cabinet, variable speed drives, protections, selectors, indicators, remote fault alarm contact, forced ventilation, pressure sensor, etc. Note: Some large-capacity panels have the variable speed drives in a separate cabinet for thermal dissipation; please consult us for details.

Optional Equipment

Modbus: Network connection for monitoring with Modbus RTU via RS-485 or Modbus TCP-IP via Ethernet.
Safety disconnect switch that cuts power when opening the cabinet.
PD-640 protector against high-voltage discharges.
Three-phase RMS digital voltmeter with max/min voltage recording and frequency meter. Mounted on the cabinet door.

Product Information User Manual

Specifications

HP	AMP. MÁX IN 22O V	AMP. MÁX IN 44O V
1	6	2.1
2	9.6	4.1
3	9.6	5.4
5	19.6	8.8
7.5	30	11.1
10	30	17.5
15	40	23
20	56	31
25	69	38
30	81	38
40	110	58
50	138	72
60	–	88
75	.	103

For more technical information, click here. aquí .

Related products

Series 10: Hydropneumatic Booster Control Panel

Controls the automatic operation of 1 to 4 pumps to maintain the desired pressure in the hydropneumatic tank within the desired ranges set on the pressure switches.

Series 10L: Digital Hydropneumatic Booster Control Panel

Tablero para sistema hidroneumático con manómetro digital y pantalla que controla la operación automática de 2 a 3 bombas para mantener la presión deseada en el tanque hidroneumático dentro de los rangos deseados ajustados por medio de la pantalla.

Series 20: Water Recirculation Pump Control Panel

Controls the automatic alternating and simultaneous operation of recirculation pumps to maintain the desired flow based on demand.

Series 30: Water Level Control Panel for Cistern-Tank Systems

Control panel for tank filling (water tank-cistern) that controls the automatic operation of 1 to 4 pumps, alternating and running them simultaneously to maintain the water level in the tank within the range set by the electrode level.

Series 40: Sump and Sewage Pump Control Panel

Control panel for sump pump emptying SERIES 40 controls the automatic operation of 1 to 4 pumps, alternating and running them simultaneously to maintain the sump empty within the levels previously set with level detectors (floats).

Pump Starter with Pump-Monitor Protection Model: AP

Starter for three-phase or single-phase pumps that protects the pumps from overload, phase failure, voltage failures, rapid cycling and low suction level (low load) without the need for electrodes.